Proper clutch alignment is critical to getting the most life and best performance from your CVT clutches and drive belt. Unfortunately, sometimes even day one Polaris didn't get the shaft spacing right. Also, over time the engine/tranny start to sag in the middle due to the way they are bolted together and they don't always sag in a straight line. So not only do the two shafts move closer together, they get out of angular alignment.
The SDi Motor Plate solidifies the connection between the motor and transmission, eliminating the sag they are prone to.
- Eliminates flex between the motor and transmission
- Keeps shafts in line (once they are aligned), reducing uncessary wear on belts
- Comes with all necessary hardware to install
- Made in the U.S.A.